PPGI-Color Coated Steel Coil with 3D Wooden Pattern
Color coated steel coil is a product made of cold-rolled steel coil and (aluminum) galvanized steel coil after surface chemical
treatment, coating (roll coating) or composite organic film (PVC film, etc.), and then baking and curing. This product is
produced by the manufacturer in coils on the continuous production line, so it is also called prepainted steel coil. It not only
has the properties of high mechanical strength and easy forming of steel materials, but also has good decoration and
corrosion resistance of coating materials.
The color coated aluminum coils is aluminum substrate after color coating unit, the surface of the multi-layer organic coating and baked and cured composite materials. Color aluminum refers to coloring the surface of the aluminum alloy. Because the aluminum alloy has very stable performance and is not easy to be corroded, the general surface layer can be guaranteed to not fade for at least 30 months after special treatment. The density(2.71 kg/m³) is smaller than PPGI,also it has higher hardness, It is the lightest metal materials. The current mainstream colors are white, red, blue, silver-gray, and so on. Customers can choose different colors through the Raul color card according to their own needs.
Color-coated aluminum coils are widely used in aluminum-plastic panels, aluminum veneers, and aluminum honeycomb panels. Aluminum ceiling, roof surface, leftovers, cans, and electronic products. Its performance is very stable and not easy to corrode. After special treatment, the surface can reach 30 months of quality assurance. The weight per unit volume is the lightest among metal materials. The surface pattern is various, also known as wood grain aluminum coil, stone grain aluminum coil, brick pattern camouflage aluminum coil, fabric aluminum coil and etc.
Product name |
PPGI-Color Coated Steel Coil with 3D Wooden Pattern |
Thickness (mm): |
0.12mm-1.2mm (±0.02 mm) |
Width (mm): |
600-1250 mm (±2 mm) |
Aluzinc Coating |
AZ 30 g/sm-275 g/sm |
Spangle |
Regular |
Coil Diameter (mm) |
508,610. |
Coil Weight(T) |
3-5 tons or As your requirement. |
Surface Treatment |
Chromated, Anti-finger |
Standard |
GB/T-14798 JIS G 3321 EN 10215 ASTM 792 |
Steel Grade |
SGLCC DX51D+AZ |
Quality |
Commercial and structural quality. |
Packing |
1. Galvalume metal & waterproof paper around the coil. 2. Both ends are covered with disks. 3. Inner and outer protective steel rings on edges. 4. 4*5 metal strapping bands and circumferential bands to make it stable. |
Port of Shipment |
Qingdao Port, or Tianjin Xingang port , China. |
Date of Delivery |
Within 15-20 days after we receive deposit or L/C at sight. |
Payment |
L/C at sight or T/T. |
Transportation |
Container / bulk ship / Train |
Supply Ability |
50,000MT per month. |
MOQ |
Any quantity for regular size. |
Application |
Making pipes,cold strip-welded pipes,cold-bent shaped-steel,bicycle structures,small-sized press-pieces and household decoration goods,boating |
1.Good durability and long life compared with galvanized steel.
2.Good heat resistance, less discoloration at high temperature than galvanized steel.
3.Good thermal reflectivity.
4.Processability and spraying performance similar to galvanized steel.
5.Good welding performance.
6.Good performance-price ratio, durable performance and extremely competitive price.
Package |
3 layers of packing, inside is kraft paper, water plastic film is in the middle and ouside GI steel sheet to
be covered by steel strips with lock, with inner coil sleeve . |
Monthly Output |
25000 tons |
Remarks |
Insurance is all risks and accept the third party test. |
Loading Port |
Tianjin/Qingdao Port |
1. Bomis Galvalume steel coil ,has good corrosion resistance. It can balance the protective and repair effects of zinc with the anti-corrosion effect of aluminum, extending the service life of steel sheets.
2. Our Galvalume steel coil has relatively good heat resistance and will not change color when exposed to temperatures of around 316 degrees for a long time. It still has good antioxidant properties at a temperature of 677 degrees.
Color steel coil is a kind of composite material, also known as color coated steel plate. It is made of strip steel after continuous surface degreasing and phosphating and other chemical transfer treatments on the production line, and then coated with organic paint and baked.
Substrate Type
1.Hot-dip galvanized color coated steel sheet(pre-painted galvanized steel sheet)
The product obtained by coating an organic coating on a hot-dip galvanized steel sheet is a hot-dip galvanized color-coated plate.
In addition to the protective effect of zinc, the hot-dip galvanized color-coated sheet also protects against rust and has a
longer service life than hot-dip galvanized sheet;
2.Hot-dip aluminum-zinc color coated sheet(pre-painted gavanized steel sheet) Hot-dip aluminum-zinc steel sheets can also be used as color-coated substrates (55% AI-Zn and 5% AI-Zn);
3.Electroplated zinc color coated sheet
The electro-galvanized sheet is used as the substrate, and the product obtained by baking with the organic coating is an
electro-galvanized color-coated plate. It has a beautiful appearance and excellent processing properties, and therefore can be mainly used for home appliances, audio, steel furniture, interior decoration, and the like.
Coating Type
Polyester (PE): Good adhesion, rich colors, wide range in formability and outdoor durability, medium chemical resistance, and low cost.
Silicon modified polyester(SMP): Good abrasion resistance and heat resistance, as well as good external durability and chalking resistance, gloss retention, general flexibility, and medium cost.
High Durability Polyester(HDP): Excellent color retention and anti-ultraviolet performance, excellent outdoor durability and
anti-pulverization, good paint film adhesion, rich color, excellent cost performance.
Polyvinylidene Fluoride(PVDF): Excellent color retention and UV resistance, excellent outdoor durability and chalking resistance, excellent solvent resistance, good moldability, stain resistance, limited color, and high cost.
PPGI & PPGL (prepainted galvanized steel & prepainted galvalume steel)
It is a product made of hot-dip galvanized steel sheet, hot-dip galvalume steel sheet, electro galvanized steel sheet, etc. After surface pretreatment, one or several layers of organic coating are applied on the surface, and then baked and solidified.
1. how can we guarantee quality?
Always a pre-production sample before mass production;Always final Inspection before shipment;
2.what can you buy from us?
PPGI,PPGL,GI,GL,Roof Sheet
3. why should you buy from us not from other suppliers?
1. 20 years manufacture &exporting
2. ISO/SGS/CE approval quality factory
3. Professional supplier in steel field
4. Product line of PPGI PPGL,GI GL
5. Machines of roofing sheet
6. Standard sea package
7. Good service
4. what services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,FAS,CIP,FCA,CPT,DEQ,Express Delivery;
Accepted Payment Currency:USD,EUR,JPY,CAD,AUD,HKD,GBP,CNY,CHF;
Accepted Payment Type: T/T,L/C,MoneyGram,Credit Card,PayPal,Western Union,Cash,Escrow;
Language Spoken:English,Chinese