E355c Cold Rolled Steel Coils Factory Price
Cold-rolled steel coils have good properties, and cold-rolled strips and steel sheets with thinner thickness and higher precision can be obtained by cold-rolling. High flatness, high surface finish, clean and bright surface of cold-rolled sheet. It is easy to be coated and processed and has the characteristics of high stamping performance and low yield point, so cold-rolled steel coil has a wide range of uses, mainly used in automobiles and building materials. At the same time, it is also the substrate for the production of galvanized steel sheets in coil and galvalume steel coil.
Carbon Steel Details:
Common carbon steel grades: Q195, Q215, Q235, Q255, Q275, etc.
Carbon alloy steel: 1008(08F), 1010(10#), 1015(15#), 1020(20#), 1025(25#), 1040(40#), 1045(45#), 1050(50#), 15Mn, 20Mn, 30Mn, 40Mn, 45Mn, 50Mn, etc.
Carbon tool steel: T7, T8, T8Mn, T10, T11, T12, etc
Each Carbon Steel Coil is being produced with care to quality by decreasing carbon contend and giving appropriate heat treatment.
Even distribution of steel coil various grades of carbon steel coil in accordance with ASTM JIS DINEN etc.
There is large amount of spot inventory and each carbon steel coil is subjected to modern physical and chemical testing.
Our Hot- and Cold-Rolled Stainless Coils are available up to 2 meters wide and in a number of grades: austenitics (S300), austenitics containing manganese (S200), duplex, KARA ferritics (S400) and martensitics.In order to ensure that the mechanical properties such as yield strength, tensile strength, elongation and hardness of various stainless steel coils meet the requirements, the stainless steel coils must undergo annealing, solution treatment, aging treatment and other heat treatments before delivery. The corrosion resistance of stainless steel coils mainly depends on its alloy composition (chromium, nickel, titanium, silicon, aluminum, etc.) and the internal structure of the stainless steel coils. The main role is chromium. Chromium has high chemical stability and can form a passivation film on the surface of steel to isolate the metal from the outside world, protect the steel plate from oxidation, and increase the corrosion resistance of the steel plate. After the passivation film is destroyed, the corrosion resistance decreases.
| Product name |
Cold Rolled Coil |
| Thickness (mm): |
0.1-16 mm (±0.02 mm) |
| Width (mm): |
10mm-2000mm(±2 mm) |
| Zinc Coating |
Z 30 g/sm-275 g/sm |
| Spangle |
Zero, Mini, Regular and Big |
| Coil Diameter (mm) |
508,610. |
| Coil Weight(T) |
3-5 tons or As your requirement. |
| Surface Treatment |
Regular & minimum spangle, oiled & dry, chromated, non-skin pass, skin pass. |
| Standard |
GB/T-2518
JIS G 3302
EN 10142/10427
ASTM A 653 |
| Steel Grade |
SGCC
DX51D+Z |
| Quality |
Commercial and structural quality. |
| Packing |
1. Galvanized metal & waterproof paper around the coil.
2. Both ends are covered with disks.
3. Inner and outer protective steel rings on edges.
4. 4*5 metal strapping bands and circumferential bands to make it stable. |
| Port of Shipment |
Qingdao Port, or Tianjin Xingang port , China. |
| Date of Delivery |
Within 15-20 days after we receive deposit or L/C at sight. |
| Payment |
L/C at sight or T/T. |
| Transportation |
Container / bulk ship / Train |
| Supply Ability |
50,000MT per month. |
| MOQ |
Any quantity for regular size. |
| Application |
Making pipes,cold strip-welded pipes,cold-bent shaped-steel,bicycle structures,small-sized press-pieces and household decoration goods,boating |
The application fields of cold-rolled coils are very wide, such as automobile manufacturing, electrical products, rolling stock, aviation, precision instruments, canned food, etc.
1. The product size of cold-rolled coils is accurate, the thickness is uniform, and the thickness difference of the
coils generally does not exceed 0.01-0.03mm or less, which can fully meet the requirements of high-precision
tolerances.
2. vailable to extremely thin strips that cannot be produced by hot rolling (the thinnest can reach 0.001mm or less).
3.
The surface quality of cold-rolled products is superior, and there are no defects such as pits and pressed iron
oxide scales that often occur in hot-rolled coils. And according to the requirements of users, it can produce
coils with different surface roughness (glossy surface or hemp rough surface, etc.) to facilitate the processing of
the next process.
4.
The mechanical properties and technological properties of cold-rolled steel coils are very good (such
as higher strength, lower yield limit, good weight deep drawing performance, etc.).
5.
High-speed rolling and full continuous rolling can be realized, with high productivity.
1. Appearance and surface quality: Cold-rolled steel coil is better in surface quality (such as Surface roughness) than hot plate because it is obtained by cold rolling and some surface finishing is carried out at the same time. Therefore, if the product after the sequence of painting, such as coating quality, there are higher requirements, the general choice of the cold plate. The hot plate is divided into the pickling plate and the unpickling plate. The surface of the pickling plate becomes the normal metal color because of pickling, but the surface of the unsold-rolled plate is not as high as that of the cold-rolled plate, or the existence of ferrosoferric oxide layer, colloquially it is fire-roasted, and if the storage environment is not good, usually with a little embroidery.
2. Properties: In general, the Mechanical Properties of hot and cold-rolled steel coil are considered to be the same in engineering, although there is a certain amount of work hardening during cold rolling, (but not rule out the case of strict mechanical performance requirements, it needs to be treated differently), cold-rolled steel coil usually than hot plate yield strength slightly higher, surface hardness is also higher, how specific need to see cold plate annealing degree. However, the strength of the annealed plate is higher than that of the hot plate.
3. Forming performance: Because the performance of cold and hot-rolled steel coil is basically not too much, so the forming performance of the influence factor depends on the difference of its surface quality, because the surface quality is the cold-rolled steel coil to be better, so generally speaking the same material steel plate, the appearance of cold plate is better than that of the hot plate.
1: Chemical industry: Equipment, industrial tanks and etc.
2: Medical instruments: Surgical instruments, surgical implants and etc.
3: Architectural purpose: Cladding, handrails, elevator, escalators, door and window fittings, street furniture,structural sections, enforcement bar, lighting columns, lintels, masonry supports, interior exterior decoration for building, milk or food processing facilities and etc.
4: Transportation: Exhaust system, car trim/grilles, road tankers, ship containers, refuse vehicles and etc.
5: Kitchen Ware: Tableware, kitchen utensil, kitchen ware, kitchen wall, food trucks, freezers and etc.
6: Oil and Gas: Platform accommodation, cable trays, sub-sea pipelines and etc.
7: Food and Drink: Catering equipment, brewing, distilling, food processing and etc.
8: Water: Water and sewage treatment, water tubing, hot water tanks and etc.
Bomis owns 2 galvanized 2 galvalume, 2 PPGI /PPGLproduction lines, and 15 roofing sheet machines. Our production line was imported from Germany and assembled only 3 years ago. And our highly defined production procedure will make sure the quality is stable and satisfactory. Our cargo is well protected .We offer commercial steel (CS Types A, B, and C) and structural steel (SS). We use Polyester, Silicone Modified Polyester, Polyvinylidene Difluoride paints for customers to choose from. We pay attention to every section that may affect the client's shopping experience, and packing is one. We always give the best packing and shipment to make sure cargo is well protected. We are familiar with the size, quality requirements, and product usage of each countries.
Q:Can you send samples?
A:Of course, we can send samples to all parts of the world, our samples are free, but customers need to bear the couriercosts.
Q:What product information do l need to provide
A:You need to provide the grade, width, thickness,coating and the number of tons you need to purchase
Q:What are the shipping ports?
A:Under normal circumstances, we ship from Shanghai, Tianjin, Qingdao, Ningbo ports, you can choose other portsaccording to your needs.
Q:About product prices?
A:Prices vary from period to period due to cyclical changes in the price of raw materials
Q:How long does your delivery time take?
A:ln general, our delivery time is within 7-15 days, and may be delayed if the demand is extremely large or special
circumstances occur
Q:Can l go to your factory to visit?
A:0f course, we welcome customers from all over the world to visit our factory. However, some of the plants are not open tothe public.
Q:Does the product have quality inspection before loading?
A:Of course, all our products are strictly tested for quality before packaging, and ungualified products wil be destroyed
Q:How to pack the products?
A:The inner layer has a waterproof paper outer laver with iron packaging and is fixed with a fumigation wooden pallet. lt careffectively protect productsfrom corrosion during ocean transportation.
Audited Supplier 
){kind=link}