JIS SPCC DC01 0.5mm Cold Rolled Steel Sheet Coil for Oil Barrel

• Type: Coil
• Standard: AISI, ASTM, DIN, JIS, GB, BS
• Composition: Ferrous Steel Scrap
• Technique: Cold Rolled
• Shape: Coil
• Surface Treatment: Color Coated
• Model NO.: BMSCRC007
• Special Use: High-strength Steel Plate, Wear Resistant Steel, Cold Heading Steel, Free Cutting Steel
• Application: Structural Steel Bar
• Transportation: Container / Bulk Ship / Train
• Logo: Print for Free
• Delivery: 25 Dasy
• Coil Weight: 3-8 Tons
• Yield Strength: 215 MPa
• Tensile Strength: 360 MPa
• Further Processing: Cutting Slitting
• Mark: with Label
• Length of Plate: 2-6m or as Your Requirements
• Certification: ISO9001
• Inspection: SGS / BV / as Your Needs
• MOQ: 5 Tons / Size
• Slittler Width: 70-1100mm
• Grades: SPCC,Spcd,Spce,Spcen,St12,St13,St14,St15,St16,DC01
• Factory or Trading: Factory
• Transport Package: Export Standard Seaworthy Packing
• Specification: 0.4-3.0mm*1000-1500mm
• Trademark: Bomis
• Origin: China
• HS Code: 72091790
• Production Capacity: 50000 Tons

Product Description

 

Product Description

Product Name:  JIS  SPCC DC01 0.5mm Cold Rolled Steel Sheet Coil for Oil Barrel

^{Cold-rolled steel coils have good properties, and cold-rolled strips and steel sheets with thinner thickness and higher precision can be obtained by cold-rolling. High flatness, high surface finish, clean and bright surface of cold-rolled sheet. It is easy to be coated and processed and has the characteristics of high stamping performance and low yield point, so cold-rolled steel coil has a wide range of uses, mainly used in automobiles and building materials. At the same time, it is also the substrate for the production of galvanized steel sheets in coil and galvalume steel coil.}

Product Parameters

  

^Thickness (mm):-	^0.4-3.0mm or customized as required
^Width (mm):	^1000-1500mmmm or customized as required
^Length(mm)	^As customers' requirement.
^Surface Treatment	^Chromated and oiled
^Weight (mt)	^3-5tons tons each package or as customers' requirement.
^Standard	^ISO,JIS,ASTM,AS EN
^Grade	^Q195,Q215,Q235,08AL,SPCC,SPCD,SPCE,SPCEN,ST12,ST13,ST14,ST15,ST16,DC01,DC03,DC04,DC05,DC06,JIS G 3141 - 2005
^Edge	^Slit Edge
^Application	^Household appliance,building material ,automobile etc

 

Product Advantages

1.The product size of cold-rolled coils is accurate, the thickness is uniform, and the thickness difference of the coils generally does not exceed 0.01-0.03mm or less, which can fully meet the requirements of high-precision tolerances.
 

2.Available to extremely thin strips that cannot be produced by hot rolling (the thinnest can reach 0.001mm or less).

 

3.The surface quality of cold-rolled products is superior, and there are no defects such as pits and pressed iron oxide scales that often occur in hot-rolled coils. And according to the requirements of users, it can produce coils with different surface roughness (glossy surface or hemp rough surface, etc.) to facilitate the processing of the next process.

4.The mechanical properties and technological properties of cold-rolled steel coils are very good (such as higher strength, lower yield limit, good weight deep drawing performance, etc.

5.High-speed rolling and full continuous rolling can be realized, with high productivity.
 

Difference Between CR HR

<sup>1.Appearance and surface quality: Cold-rolled steel coil is better in surface quality (such as Surface roughness) than hot plate because it is obtained by cold rolling and some surface finishing is carried out at the same time. Therefore, if the product after the sequence of painting, such as coating quality, there are higher requirements, the general choice of the cold plate. The hot plate is divided into the pickling plate and the unpickling plate. The surface of the pickling plate becomes the normal metal color because of pickling, but the surface of the unsold-rolled plate is not as high as that of the cold-rolled plate, or the existence of ferrosoferric oxide layer, colloquially it is fire-roasted, and if the storage environment is not good, usually with a little embroidery.

2.Properties: In general, the Mechanical Properties of hot and cold-rolled steel coil are considered to be the same in engineering, although there is a certain amount of work hardening during cold rolling, (but not rule out the case of strict mechanical performance requirements, it needs to be treated differently), cold-rolled steel coil usually than hot plate yield strength slightly higher, surface hardness is also higher, how specific need to see cold plate annealing degree. However, the strength of the annealed plate is higher than that of the hot plate.

3.Forming performance: Because the performance of cold and hot-rolled steel coil is basically not too much, so the forming performance of the influence factor depends on the difference of its surface quality, because the surface quality is the cold-rolled steel coil to be better, so generally speaking the same material steel plate, the appearance of cold plate is better than that of the hot plate.</sup>
 

Certifications

Product Display

Packing & Loading

Loading By 20ft Container



Loading By Bulk Ship

Why Choose Us

<sup>Bomis owns 2 galvanized 2 galvalume ,2 PPGI /PPGLproduction lines, and 15 roofing sheet machines. Our production line was imported from Germany and assembled only 3 years ago. And our highly defined production procedure will make sure the quality is stable and satisfactory.  our cargo is well protected .We pay attention to every section that may affect the client's shopping experience, and packing is one. We always give the best packing and shipment to make sure cargo is well protected.  We are familiar with the size, quality requirements, and product usage of each countries.

We have 15 sales with  7 years  steel exporting experience , all Bomis menbers  aslo spent a lot of time learning from  engineers and ourtechnical team.  just for serve our clients better and get tehir trusted!</sup>