Gi Strip 585*1.2mm 585*1.6mm 585*1.8mm Grade 195 Galvanized Steel Strip
Galvanized steel strip is processed by ordinary steel strip pickling, galvanizing, packaging and other processes. It is widely used because of its good anti-corrosion performance. It is mainly used to make metal products that are cold-worked and no longer galvanized. For example: metal products such as light steel keels, peach-shaped columns for guardrails, sinks, rolling doors, bridges, etc.
Carbon Steel Details:
Common carbon steel grades: Q195, Q215, Q235, Q255, Q275, etc.
Carbon alloy steel: 1008(08F), 1010(10#), 1015(15#), 1020(20#), 1025(25#), 1040(40#), 1045(45#), 1050(50#), 15Mn, 20Mn, 30Mn, 40Mn, 45Mn, 50Mn, etc.
Carbon tool steel: T7, T8, T8Mn, T10, T11, T12, etc
Each Carbon Steel Coil is being produced with care to quality by decreasing carbon contend and giving appropriate heat treatment.
Even distribution of steel coil various grades of carbon steel coil in accordance with ASTM JIS DINEN etc.
There is large amount of spot inventory and each carbon steel coil is subjected to modern physical and chemical testing.
There are many factors affecting the size of zinc flowers. When the zinc liquid composition has the conditions for the formation of zinc flowers, the following factors will affect the size of zinc flowers:
(1) Raw material: the thicker the raw material steel plate, the smaller the surface roughness, the larger the zinc flower.
(2) Cooling rate: the faster the cooling rate, the shorter the crystal growth time, the smaller the zinc flower.
(3) Number of crystal nuclei: The size of zinc flower is closely related to the number of crystal nuclei of zinc flower. When the surface of steel base is rough or the surface cleanliness is poor, the zinc flower is relatively small. Zinc grains are formed on steel base, and the more nuclei there are, the smaller the zinc flowers will be. This principle is used in the production process of small zinc flowers.
(4) Other factors (production environment, etc.).
Product name |
Cold Rolled Coil |
Thickness (mm): |
0.1-16 mm (±0.02 mm) |
Width (mm): |
10mm-2000mm(±2 mm) |
Zinc Coating |
Z 30 g/sm-275 g/sm |
Spangle |
Zero, Mini, Regular and Big |
Coil Diameter (mm) |
508,610. |
Coil Weight(T) |
3-5 tons or As your requirement. |
Surface Treatment |
Regular & minimum spangle, oiled & dry, chromated, non-skin pass, skin pass. |
Standard |
GB/T-2518 JIS G 3302 EN 10142/10427 ASTM A 653 |
Steel Grade |
SGCC DX51D+Z |
Quality |
Commercial and structural quality. |
Packing |
1. Galvanized metal & waterproof paper around the coil. 2. Both ends are covered with disks. 3. Inner and outer protective steel rings on edges. 4. 4*5 metal strapping bands and circumferential bands to make it stable. |
Port of Shipment |
Qingdao Port, or Tianjin Xingang port , China. |
Date of Delivery |
Within 15-20 days after we receive deposit or L/C at sight. |
Payment |
L/C at sight or T/T. |
Transportation |
Container / bulk ship / Train |
Supply Ability |
50,000MT per month. |
MOQ |
Any quantity for regular size. |
Application |
Making pipes,cold strip-welded pipes,cold-bent shaped-steel,bicycle structures,small-sized press-pieces and household decoration goods,boating |
The application fields of cold-rolled coils are very wide, such as automobile manufacturing, electrical products, rolling stock, aviation, precision instruments, canned food, etc.
The product size of cold-rolled coils is accurate, the
thickness is uniform, and the thickness difference of the
coils generally does not exceed 0.01-0.03mm or less,
which can fully meet the requirements of high-precision
tolerances.
- vailable to extremely thin strips that cannot be produced by hot rolling (the thinnest can reach 0.001mm or less).
The surface quality of cold-rolled products is superior,
and there are no defects such as pits and pressed iron
oxide scales that often occur in hot-rolled coils. And
according to the requirements of users, it can produce
coils with different surface roughness (glossy surface or
hemp rough surface, etc.) to facilitate the processing of
the next process.
The mechanical properties and technological
properties of cold-rolled steel coils are very good (such
as higher strength, lower yield limit, good weight deep
drawing performance, etc.).
High-speed rolling and full continuous rolling can be
realized, with high productivity.
1. Appearance and surface quality: Cold-rolled steel coil is better in surface quality (such as Surface roughness) than hot plate because it is obtained by cold rolling and some surface finishing is carried out at the same time. Therefore, if the product after the sequence of painting, such as coating quality, there are higher requirements, the general choice of the cold plate. The hot plate is divided into the pickling plate and the unpickling plate. The surface of the pickling plate becomes the normal metal color because of pickling, but the surface of the unsold-rolled plate is not as high as that of the cold-rolled plate, or the existence of ferrosoferric oxide layer, colloquially it is fire-roasted, and if the storage environment is not good, usually with a little embroidery.
2. Properties: In general, the Mechanical Properties of hot and cold-rolled steel coil are considered to be the same in engineering, although there is a certain amount of work hardening during cold rolling, (but not rule out the case of strict mechanical performance requirements, it needs to be treated differently), cold-rolled steel coil usually than hot plate yield strength slightly higher, surface hardness is also higher, how specific need to see cold plate annealing degree. However, the strength of the annealed plate is higher than that of the hot plate.
3. Forming performance: Because the performance of cold and hot-rolled steel coil is basically not too much, so the forming performance of the influence factor depends on the difference of its surface quality, because the surface quality is the cold-rolled steel coil to be better, so generally speaking the same material steel plate, the appearance of cold plate is better than that of the hot plate.
Chemical industry: Equipment, industrial tanks and etc.
Medical instruments: Surgical instruments, surgical implants and etc.
Architectural purpose: Cladding, handrails, elevator, escalators, door and window fittings, street furniture,structural sections, enforcement bar, lighting columns, lintels, masonry supports, interior exterior decoration for building, milk or food processing facilities and etc.
Transportation: Exhaust system, car trim/grilles, road tankers, ship containers, refuse vehicles and etc.
Kitchen Ware: Tableware, kitchen utensil, kitchen ware, kitchen wall, food trucks, freezers and etc.
Oil and Gas: Platform accommodation, cable trays, sub-sea pipelines and etc.
Food and Drink: Catering equipment, brewing, distilling, food processing and etc.
Water: Water and sewage treatment, water tubing, hot water tanks and etc.
Bomis owns 2 galvanized 2 galvalume, 2 PPGI /PPGLproduction lines, and 15 roofing sheet machines. Our production line was imported from Germany and assembled only 3 years ago. And our highly defined production procedure will make sure the quality is stable and satisfactory. Our cargo is well protected .We offer commercial steel (CS Types A, B, and C) and structural steel (SS). We use Polyester, Silicone Modified Polyester, Polyvinylidene Difluoride paints for customers to choose from. We pay attention to every section that may affect the client's shopping experience, and packing is one. We always give the best packing and shipment to make sure cargo is well protected. We are familiar with the size, quality requirements, and product usage of each countries.
Q:Can you send samples?
A:Of course, we can send samples to all parts of the world, our samples are free, but customers need to bear the couriercosts.
Q:What product information do l need to provide
A:You need to provide the grade, width, thickness,coating and the number of tons you need to purchase
Q:What are the shipping ports?
A:Under normal circumstances, we ship from Shanghai, Tianjin, Qingdao, Ningbo ports, you can choose other portsaccording to your needs.
Q:About product prices?
A:Prices vary from period to period due to cyclical changes in the price of raw materials
Q:How long does your delivery time take?
A:ln general, our delivery time is within 7-15 days, and may be delayed if the demand is extremely large or special
circumstances occur
Q:Can l go to your factory to visit?
A:0f course, we welcome customers from all over the world to visit our factory. However, some of the plants are not open tothe public.
Q:Does the product have quality inspection before loading?
A:Of course, all our products are strictly tested for quality before packaging, and ungualified products wil be destroyed
Q:How to pack the products?
A:The inner layer has a waterproof paper outer laver with iron packaging and is fixed with a fumigation wooden pallet. lt careffectively protect productsfrom corrosion during ocean transportation.